FAQs:

Our Instruments are currently used by the best Universities & Companies around the world. Among the many we can mention: Roche, Yale, Novartis, Stanford, Mayo Clinic, Berkeley, Oxford and much more.

This website, as well as our social media channels, are often updated with new Business Cases and Scientific Papers ready to be consulted.

Sure! In any moment you can use the K-Factor to change the gas via the Software or Touch Display.

The K-Factor is used by the software to mathematically adjust the channel calibration curve in case you need to work with gases the channels have not been calibrated for.

How to do that?

Easy: Go on “Setting” and after click on “Channel Gas Setting”.

More info at Chapter 6 on the Manual.

Sure! Custom cylinder function allows you to create your new customised K-Factor. Name it, set the data and it’s done.

How to do that?

Easy: Go on “Setting” and after click on “Custom Cylinder”.

More info at Chapter 6 on the Manual.

Sure! Custom cylinder function allows you to create a no-pure gas cylinder and to calculate the correct K-Factor. After having chosen the name of your own cylinder you can set the main components and the percentages in %, ppm or ppb of the minor gases, and visualize the calculated K-Factor.

How to do that?

Easy: Go on “Setting” and after click on “Custom Cylinder”.

More info at Chapter 6 on the Manual.

It depends on the concentration. Example, we can manage up to 1000 ppm di H2S.

Contact us at: info@mcqinst.com for more information

If you have a full range of 500 ml/min, with a cut-off of 10% you cannot control flow-rates below than 50 ml/min.

Gas Blender 100 Series has NO CUT-OFF so you can control the flow range from 0,5 ml/min to 500 ml/min.

Yes, all our instruments are CE, TUV and cTUVUS/ul certified.

Yes using MODBUS protocol you can control the instrument with your own software. We supply a specific command list.

Yes using MODBUS protocol you can control the instrument with your own software. We also supply a specific ddl for Python.

Yes using MODBUS protocol you can control the instrument with your own software. We supply a specific command list.